Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: au88x0 driver

Fixed the structures for equalizer.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: ES18xx driver

Forth of 4 es18xx.c patches culminating in Zoom Video support.

This patch adds Zoom Video support for those chipsets that support it.

Testing:
This work was initially done on the source from the Debian Sarge ALSA
package, then tested
on an ES1879. I could not test the Zoom Video function for an ES1878 or
ES1869.
Patches were created against the Sarge code and then edited to apply
correctly to the
ALSA cvs code. Lastly the patched ALSA cvs code was test for successful
compilation.
No additional testing was done on the ALSA cvs version.

One quirk (noted in my comments below) is that apparently the datasheet
is wrong
for one of the ES1879 Zoom Video 'enable' bits, because
 1) if you set this bit it messes up PCM playback (speaker_test play a
lower frequency)
 2) even if you don't set this bit Zoom Video still works.
I added a control to toggle the bit on just in case there might be a
version of the
ES1879 that requires it, but I expect noone will need it.

Signed-off-by: Mark Salazar <markTheCoder@justmyself.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: ES18xx driver

Third of 4 es18xx.c patches culminating in Zoom Video support.

This patch changes the Hardware Volume support to reflect the fact that
not all of the
supported chipsets have seperate registers dedicated to the Hardware
Volume inputs. Although
all the chipsets can generate an HWV interrupt whenever a Hardware
Volume input is received
only those with seperate HWV registers can split the HWV registers from
the Master volume
registers.

Testing:
This work was initially done on the source from the Debian Sarge ALSA
package, then tested
on an ES1879 and an ES1878 machine. Patches were created against the
Sarge code and then edited
to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs
code was test for
successful compilation. No additional testing was done on the ALSA cvs
version.

Signed-off-by: Mark Salazar <markTheCoder@justmyself.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: ES18xx driver

Second of 4 es18xx.c patches culminating in Zoom Video support.

This patch changes the 'record source' mux routines to reflect the fact
that not all of the
supported chipsets have 8 possible inputs. Some have 4 and some have 5.

Testing:
This work was initially done on the source from the Debian Sarge ALSA
package, then tested
on an ES1879 and an ES1878 machine. Patches were created against the
Sarge code and then edited
to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs
code was test for
successful compilation. No additional testing was done on the ALSA cvs
version.

Signed-off-by: Mark Salazar <markTheCoder@justmyself.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: ES18xx driver

First of 4 es18xx.c patches culminating in Zoom Video support.
While adding support for Zoom Video to the es18xx driver I found some of
the mixer controls
were wrong. Since you guys went to the trouble of supplying the
datasheets for the supported
chipsets I did a review of all of them and tried to get es18xx.c to
accurately reflect the
proper mixer controls for each chipset. If the datasheets are wrong then
so are my patches.

This first patch moves some controls from the common-to-all-chipsets array
'snd_es18xx_base_controls' to a chipset-specific array and adds code to
manage that new array.
Also while testing on my ES1878 test machine I discovered it needed a
couple of udelays in
the identify function so those are in this patch as well.

Testing:
This work was initially done on the source from the Debian Sarge ALSA
package, then tested
on an ES1879 and an ES1878 machine. Patches were created against the
Sarge code and then edited
to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs
code was test for
successful compilation. No additional testing was done on the ALSA cvs
version.

Signed-off-by: Mark Salazar <markTheCoder@justmyself.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: USB generic driver

Add a quirk entry for the Edirol PC-50.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver

Replace snd_xxx_t typedefs with explicit structs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: au88x0 driver

Fix the driver codes to run on 64bit architectures.
The patch taken from ALSA BTS bug#1047.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: Documentation

Updated the description of ice1724 driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: ICE1712 driver

Added the support of Prodigy-7.1LT board.
The patch taken from ALSA BTS bug#1090.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: ALSA<-OSS emulation

Clean up pcm-oss plugin codes.
Removed dead codes, and simplified route/rate plugins.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: ALSA<-OSS emulation

Fixed a typo.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: ALSA Core,PCM Midlevel,ALSA<-OSS emulation,USB generic driver

1) The verbose procfs code for the PCM midlevel and usb audio
   can be removed now (more patches will follow).
   CONFIG_SND_VERBOSE_PROCFS
2) The PCM OSS plugin system can be also compiled optionaly.
   CONFIG_SND_PCM_OSS_PLUGINS

Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Modules: YMFPCI driver

The routing of the effect 2/3 channels to the digital output is the
opposite of the rear analog output (left/right swapped).

We make the order correct for the digital output (which will make the
analog rear have the channels swapped) to make AC3 output work.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

Modules: Documentation,HDA Intel driver

Added single_cmd module option for debugging in the case CORB/RIRB
doesn't work well (e.g. due to wrong irq routings).

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: Intel8x0 driver

Fix the detection of tertriary codec on SIS7012, including clean-ups
of relevant codes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: ENS1370/1+ driver

Fix resume of ens1370 driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: USB generic driver

Move the common packet size calculation code from
prepare_startup_playback_urb() and prepare_playback_urb() to a new
function.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

Modules: USB generic driver

Move some entries around to keep them sorted by ID.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

Modules: USB generic driver

This is my naive attempt at adding ALSA device support. The attached
patch provides support for the EDIROL UM-3ex. This is a 3-port USB midi
interface with a built-in USB hub and the ability to chain 2 other
UM-3x's in a master-slave configuration. I only have one, so I do not
know how this works in practice.

Though this is a 3-port device, I had to throw in that 4th 'Control' interface
to the definition in order to make the 3rd port work. If I set in/out_cables
to 0x000b, a 3rd interface appears on the driver, but it does nothing.
Changing it to 0x000f allows the 3rd interface to work, but of course
interface 4 does not work because it does not exist.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modules: Digigram PCXHR driver

Suppress debug messages.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (230 commits)
  [SPARC64]: Update defconfig.
  [SPARC64]: Fix 2 bugs in huge page support.
  [SPARC64]: CONFIG_BLK_DEV_RAM fix
  [SPARC64]: Optimized TSB table initialization.
  [SPARC64]: Allow CONFIG_MEMORY_HOTPLUG to build.
  [SPARC64]: Use SLAB caches for TSB tables.
  [SPARC64]: Don't kill the page allocator when growing a TSB.
  [SPARC64]: Randomize mm->mmap_base when PF_RANDOMIZE is set.
  [SPARC64]: Increase top of 32-bit process stack.
  [SPARC64]: Top-down address space allocation for 32-bit tasks.
  [SPARC64] bbc_i2c: Fix cpu check and add missing module license.
  [SPARC64]: Fix and re-enable dynamic TSB sizing.
  [SUNSU]: Fix missing spinlock initialization.
  [TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts.
  [SPARC64]: First cut at VIS simulator for Niagara.
  [SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check.
  [SPARC64]: Add SMT scheduling support for Niagara.
  [SPARC64]: Fix 32-bit truncation which broke sparsemem.
  [SPARC64]: Move over to sparsemem.
  [SPARC64]: Fix new context version SMP handling.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: add uid, gid, and umask mount options
  JFS: Take logsync lock before testing mp->lsn
  JFS: kzalloc conversion
  JFS: Add missing file from fa3241d2
  JFS: Use the kthread_ API
  JFS: Fix regression.  fsck complains if symlinks do not have INLINEEA attribute
  JFS: ext2 inode attributes for jfs
  JFS: semaphore to mutex conversion.
  JFS: make buddy table static
  JFS: Add back directory i_size calculations for legacy partitions

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (150 commits)
  [PATCH] ipw2100: Update version ipw2100 stamp to 1.2.2
  [PATCH] ipw2100: move mutex.h include from ipw2100.c to ipw2100.h
  [PATCH] ipw2100: semaphore to mutexes conversion
  [PATCH] ipw2100: Fix radiotap code gcc warning
  [PATCH] ipw2100: add radiotap headers to packtes captured in monitor mode
  [PATCH] ipw2x00: expend Copyright to 2006
  [PATCH] drivers/net/wireless/ipw2200.c: fix an array overun
  [PATCH] ieee80211: Don't update network statistics from off-channel packets.
  [PATCH] ipw2200: Update ipw2200 version stamp to 1.1.1
  [PATCH] ipw2200: switch to the new ipw2200-fw-3.0 image format
  [PATCH] ipw2200: wireless extension sensitivity threshold support
  [PATCH] ipw2200: Enables the "slow diversity" algorithm
  [PATCH] ipw2200: Set a meaningful silence threshold value
  [PATCH] ipw2200: export `debug' module param only if CONFIG_IPW2200_DEBUG
  [PATCH] ipw2200: Change debug level for firmware error logging
  [PATCH] ipw2200: Filter unsupported channels out in ad-hoc mode
  [PATCH] ipw2200: Fix ipw_sw_reset() implementation inconsistent with comment
  [PATCH] ipw2200: Fix rf_kill is activated after mode change with 'disable=1'
  [PATCH] ipw2200: remove the WPA card associates to non-WPA AP checking
  [PATCH] ipw2200: Add signal level to iwlist scan output
  ...

* 'block-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/block:
  [PATCH] fix rmmod problems with elevator attributes, clean them up
  [PATCH] elevator_t lifetime rules and sysfs fixes
  [PATCH] noise removal: cfq-iosched.c
  [PATCH] don't bother with refcounting for cfq_data
  [PATCH] fix sysfs interaction and lifetime rules handling for queues
  [PATCH] regularize blk_cleanup_queue() use
  [PATCH] fix cfq_get_queue()/ioprio_set(2) races
  [PATCH] deal with rmmod/put_io_context() races
  [PATCH] stop elv_unregister() from rogering other iosched's data, fix locking
  [PATCH] stop cfq from pinning queue down
  [PATCH] make cfq_exit_queue() prune the cfq_io_context for that queue
  [PATCH] fix the exclusion for ioprio_set()
  [PATCH] keep sync and async cfq_queue separate
  [PATCH] switch to use of ->key to get cfq_data by cfq_io_context
  [PATCH] stop leaking cfq_data in cfq_set_request()
  [PATCH] fix cfq hash lookups
  [PATCH] fix locking in queue_requests_store()
  [PATCH] fix double-free in blk_init_queue_node()
  [PATCH] don't do exit_io_context() until we know we won't be doing any IO

Signed-off-by: David S. Miller <davem@davemloft.net>

1) huge_pte_offset() did not check the page table hierarchy
   elements as being empty correctly, resulting in an OOPS

2) Need platform specific hugetlb_get_unmapped_area() to handle
   the top-down vs. bottom-up address space allocation strategies.

Signed-off-by: David S. Miller <davem@davemloft.net>

init/do_mounts_rd.c depends upon CONFIG_BLK_DEV_RAM, not CONFIG_BLK_DEV_INITRD.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We only need to write an invalid tag every 16 bytes,
so taking advantage of this can save many instructions
compared to the simple memset() call we make now.

A prefetching implementation is implemented for sun4u
and a block-init store version if implemented for Niagara.

The next trick is to be able to perform an init and
a copy_tsb() in parallel when growing a TSB table.

Signed-off-by: David S. Miller <davem@davemloft.net>

online_page() is straightforward, and then add a dummy
remove_memory() that returns -EINVAL just like i386.

There is no point in implementing remove_memory() since
__remove_pages() has no implementation either.

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Try only lightly on > 1 order allocations.

If a grow fails, we are under memory pressure, so do not try
to grow the TSB for this address space any more.

If a > 0 order TSB allocation fails on a new fork, retry using
a 0 order allocation.

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Put it one page below the top of the 32-bit address space.
This gives us ~16MB more address space to work with.

Signed-off-by: David S. Miller <davem@davemloft.net>

Currently allocations are very constrained for 32-bit processes.
It grows down-up from 0x70000000 to 0xf0000000 which gives about
2GB of stack + dynamic mmap() space.

So support the top-down method, and we need to override the
generic helper function in order to deal with D-cache coloring.

With these changes I was able to squeeze out a mmap() just over
3.6GB in size in a 32-bit process.

Signed-off-by: David S. Miller <davem@davemloft.net>