- Jan 26, 2023
-
-
Andy Shevchenko authored
The device fwnode can be get via dev_fwnode() getter. Use it where it makes sense. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230113220703.45686-1-andriy.shevchenko@linux.intel.com Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Andy Shevchenko authored
This reverts commit 3550bba2. No users for this one, revert it for good. The ->add_pin_ranges() can be used instead. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230113215352.44272-5-andriy.shevchenko@linux.intel.com Signed-off-by:
-
Andy Shevchenko authored
Yeah, while the ->add_pin_ranges() shouldn't be used by DT drivers, this one requires it to support quite old firmware descriptions that do not have gpio-ranges property. The change allows to clean up GPIO library from OF specifics. There is no functional change intended. Signed-off-by:
-
Andy Shevchenko authored
Remove wrong of_node_put() in bcm2835_of_gpio_ranges_fallback(), there is no counterpart of_node_get() for it. Fixes: d2b67744 ("pinctrl: bcm2835: implement hook for missing gpio-ranges") Signed-off-by:
-
Andy Shevchenko authored
The ->add_pin_ranges() is supposed to be called for the backward compatiblity on Device Tree platforms or non-DT ones. Ensure that by checking presense of the "gpio-ranges" property. This allows to clean up a few existing drivers to avoid duplication of the check. Signed-off-by:
-
- Jan 16, 2023
-
-
ye xingchen authored
linux/seq_file.h is included more than once. Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202301161545238948580@zte.com.cn Signed-off-by:
-
Andy Shevchenko authored
The driver doesn't depend on the OF to be complied. Hence the proper header to use is mod_devicetable.h. Replace of*.h with the above mentioned and drop redundant dependency. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/20230113143640.24302-2-andriy.shevchenko@linux.intel.com Signed-off-by:
-
Andy Shevchenko authored
The of_gpio_n_cells default is 2 when ->of_xlate() callback is not defined. No need to assign it explicitly in the driver. Signed-off-by:
-
Andy Shevchenko authored
The of_gpio_n_cells default is 2 when ->of_xlate() callback is not defined. No need to assign it explicitly in the driver. Signed-off-by:
-
Andy Shevchenko authored
The of_gpio_n_cells default is 2 when ->of_xlate() callback is not defined. No need to assign it explicitly in the driver. Signed-off-by:
-
Andy Shevchenko authored
The of_gpio_n_cells default is 2 when ->of_xlate() callback is not defined. No need to assign it explicitly in the driver. Signed-off-by:
-
Andy Shevchenko authored
Replace mentioning of legacy API by the latest one. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230112134849.59534-1-andriy.shevchenko@linux.intel.com Signed-off-by:
-
Arınç ÜNAL authored
Not every function can be muxed to a group. Add proper binding which documents which function can be muxed to a group or set of groups. Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20221231160849.40544-7-arinc.unal@arinc9.com Signed-off-by:
-
Arınç ÜNAL authored
Not every function can be muxed to a group. Add proper binding which documents which function can be muxed to a group or set of groups. Signed-off-by:
-
Arınç ÜNAL authored
Not every function can be muxed to a group. Add proper binding which documents which function can be muxed to a group or set of groups. Signed-off-by:
-
Arınç ÜNAL authored
Not every function can be muxed to a group. Add proper binding which documents which function can be muxed to a group or set of groups. Signed-off-by:
-
Arınç ÜNAL authored
Not every function can be muxed to a group. Add proper binding which documents which function can be muxed to a group or set of groups. Signed-off-by:
-
Arınç ÜNAL authored
These variables define a list of functions which can be muxed to the pin group which the name of the pin group was originally intended to be pointed out on the name of the said variables. Therefore, rename "func" to "grp" across all subdrivers where this applies. Fixes: 18653d4b ("pinctrl: ralink: rename variable names for functions on MT7620 and MT7621") Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-512-uwe@kleine-koenig.org Signed-off-by:
-
- Jan 10, 2023
-
-
Krzysztof Kozlowski authored
Allow bias-bus-hold and input-enable properties (already used in SM8450): sm8450-qrd.dtb: pinctrl@3440000: dmic02-default-state: 'oneOf' conditional failed, one must be fixed: 'pins' is a required property 'function' is a required property 'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+' 'input-enable' does not match any of the regexes: 'pinctrl-[0-9]+' Compact the properties which are just set to true for readability. Signed-off-by:Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221222161420.172824-1-krzysztof.kozlowski@linaro.org Signed-off-by:
-
Krzysztof Kozlowski authored
The SM8450 has GPIOs from 0 to 209, so 210 in total: sm8450-sony-xperia-nagara-pdx223.dtb: pinctrl@f100000: gpio-line-names: ['NC', 'NC', 'NC', 'NC', 'WLC_I2C_SDA', 'WLC_I2C_SCL', ... 'APPS_I2C_0_SDA', 'APPS_I2C_0_SCL', 'CCI_I2C3_SDA', 'CCI_I2C3_SCL'] is too long Fixes: 9779ed30 ("dt-bindings: pinctrl: qcom,sm8450-pinctrl: add gpio-line-names") Signed-off-by: -
Andy Shevchenko authored
pinctrl_get_group_selector() prints an error message when group is not found in the list. No need to repeat this in the caller. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Luca Weiss authored
Add support for the general purpose clocks that are found on MSM8226. Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Co-developed-by:
Matti Lehtimäki <matti.lehtimaki@gmail.com> Signed-off-by:
-
Matti Lehtimäki authored
Document the general purpose clock functions that are found on MSM8226. Signed-off-by:
-
Peng Fan authored
The i.MX8MM/N/P/Q IOMUXC schemas are basically the same, it does not to have four schemas for almost the same binding. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Acked-by:
-
- Jan 09, 2023
-
-
Neil Armstrong authored
Add support for the pm8550, pm8550b, pm8550ve, pm8550vs, pmk8550 & pmr735d gpio controllers providing GPIO control over SPMI. Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-spmi-v2-3-b839bf2d558a@linaro.org Signed-off-by:
-
Neil Armstrong authored
dt-bindings: pinctrl: qcom,pmic-gpio: document pm8550, pm8550b, pm8550ve, pm8550vs, pmk8550 & pmr735d Document compatible, pin count & pin names for pm8550, pm8550b, pm8550ve, pm8550vs, pmk8550 & pmr735d SPMI GPIO controllers. Signed-off-by:
-
Miaoqian Lin authored
of_find_node_by_phandle() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. Fixes: d3e51161 ("pinctrl: add pinctrl driver for Rockchip SoCs") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20230102112845.3982407-1-linmq006@gmail.com Signed-off-by:
-
Miaoqian Lin authored
of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. Fixes: d86f4d71 ("pinctrl: stm32: check irq controller availability at probe") Signed-off-by:
-
Adam Skladowski authored
Adjust names of function for wcss pins, also fix third gpio in bt group. Fixes: bcd11493 ("pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956") Signed-off-by:
Adam Skladowski <a39.skl@gmail.com> Reviewed-by:
Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20221231164250.74550-1-a39.skl@gmail.com Signed-off-by:
-
Abel Vesa authored
Add pinctrl driver for TLMM block found in SM8550 SoC. Co-developed-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
Bjorn Andersson <andersson@kernel.org> Signed-off-by:
-
Abel Vesa authored
Add device tree binding Documentation details for Qualcomm SM8550 TLMM device Signed-off-by:
-
- Dec 29, 2022
-
-
Melody Olvera authored
Add pin control driver for the TLMM block found in the QDU1000 and QRU1000 SoC. Signed-off-by:
Melody Olvera <quic_molvera@quicinc.com> Reviewed-by:
-
Melody Olvera authored
Add device tree bindings for QDU1000 and QRU1000 TLMM devices. Signed-off-by:
-
Biju Das authored
Add device tree bindings for the RZ/G2L Port Output Enable for GPT (POEG). Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
-
Arnd Bergmann authored
With the old SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, some configs result in a build warning: drivers/pinctrl/pinctrl-at91.c:1668:12: error: 'at91_gpio_resume' defined but not used [-Werror=unused-function] 1668 | static int at91_gpio_resume(struct device *dev) | ^~~~~~~~~~~~~~~~ drivers/pinctrl/pinctrl-at91.c:1650:12: error: 'at91_gpio_suspend' defined but not used [-Werror=unused-function] 1650 | static int at91_gpio_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~ Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/20221215164301.934805-1-arnd@kernel.org Signed-off-by:
-
Lukas Bulwahn authored
Defines prefixed with "CONFIG" should be limited to proper Kconfig options, that are introduced in a Kconfig file. Here, expressions to convert pin configurations to booleans for pull-up, voltage and mA are macro definitions that begin with "CONFIG". To avoid defines prefixed with "CONFIG", rename these defines to begin with "PIN_CONFIG" instead. No functional change. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20221215092128.3954-1-lukas.bulwahn@gmail.com Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
-
