Modpost generates .vmlinux.export.c and *.mod.c, which are prerequisites
of vmlinux and modules, respectively.

The modpost stage should be re-run when the modpost code is updated.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Currently, modpost is executed twice; first for vmlinux, second
for modules.

This commit merges them.

Current build flow
==================

  1) build obj-y and obj-m objects
    2) link vmlinux.o
      3) modpost for vmlinux
        4) link vmlinux
          5) modpost for modules
            6) link modules (*.ko)

The build steps 1) through 6) are serialized, that is, modules are
built after vmlinux. You do not get benefits of parallel builds when
scripts/link-vmlinux.sh is being run.

New build flow
==============

  1) build obj-y and obj-m objects
    2) link vmlinux.o
      3) modpost for vmlinux and modules
        4a) link vmlinux
        4b) link modules (*.ko)

In the new build flow, modpost is invoked just once.

vmlinux and modules are built in parallel. One exception is
CONFIG_DEBUG_INFO_BTF_MODULES=y, where modules depend on vmlinux.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Move the build rules of vmlinux.o out of scripts/link-vmlinux.sh to
clearly separate 1) pre-modpost, 2) modpost, 3) post-modpost stages.
This will make further refactoring possible.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

.vmlinux.objs is used by modpost, so scripts/Makefile.modpost is
a better place to generate it.

It is used only when CONFIG_MODVERSIONS=y. It should be guarded
by "ifdef CONFIG_MODVERSIONS".

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Use the ordinary obj-y syntax to list subdirectories.

Note1:
Previously, the link order of lib-y depended on CONFIG_MODULES; lib-y
was linked before drivers-y when CONFIG_MODULES=y, otherwise after
drivers-y. This was a bug of commit 7273ad2b ("kbuild: link lib-y
objects to vmlinux forcibly when CONFIG_MODULES=y"), but it was not a
big deal after all. Now, all objects listed in lib-y are linked last,
irrespective of CONFIG_MODULES.

Note2:
Finally, the single target build in arch/*/lib/ works correctly. There was
a bug report about this. [1]

  $ make ARCH=arm arch/arm/lib/findbit.o
    CALL    scripts/checksyscalls.sh
    AS      arch/arm/lib/findbit.o

[1]: https://lore.kernel.org/linux-kbuild/YvUQOwL6lD4%2F5%2FU6@shell.armlinux.org.uk/



Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

cc-ifversion is GCC specific. Replace it with compiler specific
variants. Update the users of cc-ifversion to use these new macros.

Link: https://github.com/ClangBuiltLinux/linux/issues/350
Link: https://lore.kernel.org/llvm/CAGG=3QWSAUakO42kubrCap8fp-gm1ERJJAYXTnP1iHk_wrH=BQ@mail.gmail.com/


Suggested-by: Bill Wendling <morbo@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Doing make V=1 binrpm-pkg results in:

 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.EgV6qJ
 + umask 022
 + cd .
 + /bin/rm -rf /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x
 + /bin/mkdir -p /home/scgl/rpmbuild/BUILDROOT
 + /bin/mkdir /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x
 + mkdir -p /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot
 + make -f ./Makefile image_name
 + cp test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) arch/s390/boot/bzImage /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot/vmlinuz-6.0.0-rc5+
 cp: invalid option -- 'e'
 Try 'cp --help' for more information.
 error: Bad exit status from /var/tmp/rpm-tmp.EgV6qJ (%install)

Because the make call to get the image name is verbose and prints
additional information.

Fixes: 993bdde9 ("kbuild: add image_name to no-sync-config-targets")
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Remove unused function argument, and there is
no logic changes.

Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

sym_set_choice_value could be removed and directly call
sym_set_tristate_value instead.

Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Since commit 7b453719 ("kbuild: link symbol CRCs at final link,
removing CONFIG_MODULE_REL_CRCS"), the module versioning on the
(non-upstreamed-yet) kvx Linux port is broken due to unexpected padding
for __crc_* symbols. The kvx GCC adds padding so u32 gets 8-byte
alignment instead of 4.

I do not know if this happens for upstream architectures in general,
but any compiler has the freedom to insert padding for faster access.

Use the inline assembler to directly specify the wanted data layout.
This is how we previously did before the breakage.

Link: https://lore.kernel.org/lkml/20220817161438.32039-1-ysionneau@kalray.eu/
Link: https://lore.kernel.org/linux-kbuild/31ce5305-a76b-13d7-ea55-afca82c46cf2@kalray.eu/


Fixes: 7b453719 ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS")
Reported-by: Yann Sionneau <ysionneau@kalray.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Yann Sionneau <ysionneau@kalray.eu>

Based on Linus' patch. Refactor scripts/Makefile.vmlinux_o as well.

Link: https://lore.kernel.org/lkml/CAHk-=wgjTMQgiKzBZTmb=uWGDEQxDdyF1+qxBkODYciuNsmwnw@mail.gmail.com/


Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

The single target build has a subtle bug for the combination for
an individual file and a subdirectory.

[1] 'make kernel/fork.i' builds only kernel/fork.i

  $ make kernel/fork.i
    CALL    scripts/checksyscalls.sh
    DESCEND objtool
    CPP     kernel/fork.i

[2] 'make kernel/' builds only under the kernel/ directory.

  $ make kernel/
    CALL    scripts/checksyscalls.sh
    DESCEND objtool
    CC      kernel/fork.o
    CC      kernel/exec_domain.o
       [snip]
    CC      kernel/rseq.o
    AR      kernel/built-in.a

But, if you try to do [1] and [2] in a single command, you will get
only [1] with a weird log:

  $ make kernel/fork.i kernel/
    CALL    scripts/checksyscalls.sh
    DESCEND objtool
    CPP     kernel/fork.i
  make[2]: Nothing to be done for 'kernel/'.

With 'make kernel/fork.i kernel/', you should get both [1] and [2].

Rewrite the single target build.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Remove the bash build dependency for those who otherwise do not
have it installed. This also provides a significant speedup:

$ make defconfig
$ make yes2modconfig

...

$ find  .  -name "*.o" | grep -v vmlinux | wc
     3169      3169     89615
$ export NM=nm
$ time sh -c 'find . -name "*.o" | grep -v vmlinux | xargs -n1
./scripts/check-local-export'

Without patch:
    0m15.90s real     0m12.17s user     0m05.28s system

With patch:
dash + nawk
    0m02.16s real     0m02.92s user     0m00.34s system

dash + busybox awk
    0m02.36s real     0m03.36s user     0m00.34s system

dash + gawk
    0m02.07s real     0m03.26s user     0m00.32s system

bash + gawk
    0m03.55s real     0m05.00s user     0m00.54s system

Signed-off-by: Owen Rafferty <owen@owenrafferty.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This reverts commit [1] in the pre-git era.

I do not know what problem happened in the script when sh != bash
because there is no commit message.

Now that this script is much simpler than it used to be, let's revert
it, and let' see. (If this turns out to be problematic, fix the code
with proper commit description.)

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=11acbbbb8a50f4de7dbe4bc1b5acc440dfe81810



Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Minimize the scope of LC_ALL=C like before commit 87c94bfb ("kbuild:
override build timestamp & version").

Give LC_ALL=C to '$LD -v' to get the consistent version output, as commit
bcbcf50f ("kbuild: fix ld-version.sh to not be affected by locale")
mentioned the LD version is affected by locale.

While I was here, I merged two sed invocations.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Now that UTS_VERSION was separated out, this header can be generated
much earlier, and probably the top Makefile is a better place to do it
than init/Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Kbuild builds init/built-in.a twice; first during the ordinary
directory descending, second from scripts/link-vmlinux.sh.

We do this because UTS_VERSION contains the build version and the
timestamp. We cannot update it during the normal directory traversal
since we do not yet know if we need to update vmlinux. UTS_VERSION is
temporarily calculated, but omitted from the update check. Otherwise,
vmlinux would be rebuilt every time.

When Kbuild results in running link-vmlinux.sh, it increments the
version number in the .version file and takes the timestamp at that
time to really fix UTS_VERSION.

However, updating the same file twice is a footgun. To avoid nasty
timestamp issues, all build artifacts that depend on init/built-in.a
are atomically generated in link-vmlinux.sh, where some of them do not
need rebuilding.

To fix this issue, this commit changes as follows:

[1] Split UTS_VERSION out to include/generated/utsversion.h from
    include/generated/compile.h

    include/generated/utsversion.h is generated just before the
    vmlinux link. It is generated under include/generated/ because
    some decompressors (s390, x86) use UTS_VERSION.

[2] Split init_uts_ns and linux_banner out to init/version-timestamp.c
    from init/version.c

    init_uts_ns and linux_banner contain UTS_VERSION. During the ordinary
    directory descending, they are compiled with __weak and used to
    determine if vmlinux needs relinking. Just before the vmlinux link,
    they are compiled without __weak to embed the real version and
    timestamp.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This is unneeded since commit 073a9ecb ("init/version.c: remove
Version_<LINUX_VERSION_CODE> symbol").

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Unify the code between in-tree builds and external module builds.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Remove the potentially invalid modules.order instead of using
the temporary file.

Also, KBUILD_MODULES is don't care for single builds. No need to
cancel it.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The dependency, "modules: modules_check" is specified twice.
Commit 1a998be6 ("kbuild: check module name conflict for external
modules as well") missed to clean it up.

'PHONY += modules' also appears twice.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use obj-y to clean up Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The AWK code was added to deduplicate modules.order in case $(obj-m)
contains the same module multiple times, but it is actually unneeded
since commit b2c88554 ("kbuild: update modules.order only when
contained modules are updated").

The list is already deduplicated before being processed by AWK because
$^ is the deduplicated list of prerequisites.
(Please note the real-prereqs macro uses $^)

Yet, modules.order will contain duplication if two different Makefiles
build the same module:

  foo/Makefile:

      obj-m += bar/baz.o

  foo/bar/Makefile:

      obj-m += baz.o

However, the parallel builds cannot properly handle this case in the
first place. So, it is better to let it fail (as already done by
scripts/modules-check.sh).

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

It is unneeded to check the sha1sum every time.

Create the timestamp files to manage it.

Add '.' to clean-dirs because 'make clean' must visit ./Kbuild to
clean up the timestamp files.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

My future plan is to list subdirectories in ./Kbuild. When it occurs,
$(vmlinux-alldirs) will not contain all subdirectories.

Let's hard-code the directory list until I get around to implementing
a more sophisticated way for generating a source tarball.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

missing-syscalls and old-atomics are meant to be phony targets.
Adding them to always-y is odd. (always-y should generate something).

Add a new phony target 'prepare', which depends on all the other.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When receiving some signal, GNU Make automatically deletes the target if
it has already been changed by the interrupted recipe.

If the target is possibly incomplete due to interruption, it must be
deleted so that it will be remade from scratch on the next run of make.
Otherwise, the target would remain corrupted permanently because its
timestamp had already been updated.

Thanks to this behavior of Make, you can stop the build any time by
pressing Ctrl-C, and just run 'make' to resume it.

Kbuild also relies on this feature, but it is equivalently important
for any build systems that make decisions based on timestamps (if you
want to support Ctrl-C reliably).

However, this does not always work as claimed; Make immediately dies
with Ctrl-C if its stderr goes into a pipe.

  [Test Makefile]

    foo:
            echo hello > $@
            sleep 3
            echo world >> $@

  [Test Result]

    $ make                         # hit Ctrl-C
    echo hello > foo
    sleep 3
    ^Cmake: *** Deleting file 'foo'
    make: *** [Makefile:3: foo] Interrupt

    $ make 2>&1 | cat              # hit Ctrl-C
    echo hello > foo
    sleep 3
    ^C$                            # 'foo' is often left-over

The reason is because SIGINT is sent to the entire process group.
In this example, SIGINT kills 'cat', and 'make' writes the message to
the closed pipe, then dies with SIGPIPE before cleaning the target.

A typical bad scenario (as reported by [1], [2]) is to save build log
by using the 'tee' command:

    $ make 2>&1 | tee log

This can be problematic for any build systems based on Make, so I hope
it will be fixed in GNU Make. The maintainer of GNU Make stated this is
a long-standing issue and difficult to fix [3]. It has not been fixed
yet as of writing.

So, we cannot rely on Make cleaning the target. We can do it by
ourselves, in signal traps.

As far as I understand, Make takes care of SIGHUP, SIGINT, SIGQUIT, and
SITERM for the target removal. I added the traps for them, and also for
SIGPIPE just in case cmd_* rule prints something to stdout or stderr
(but I did not observe an actual case where SIGPIPE was triggered).

[Note 1]

The trap handler might be worth explaining.

    rm -f $@; trap - $(sig); kill -s $(sig) $$

This lets the shell kill itself by the signal it caught, so the parent
process can tell the child has exited on the signal. Generally, this is
a proper manner for handling signals, in case the calling program (like
Bash) may monitor WIFSIGNALED() and WTERMSIG() for WCE although this may
not be a big deal here because GNU Make handles SIGHUP, SIGINT, SIGQUIT
in WUE and SIGTERM in IUE.

  IUE - Immediate Unconditional Exit
  WUE - Wait and Unconditional Exit
  WCE - Wait and Cooperative Exit

For details, see "Proper handling of SIGINT/SIGQUIT" [4].

[Note 2]

Reverting 392885ee ("kbuild: let fixdep directly write to .*.cmd
files") would directly address [1], but it only saves if_changed_dep.
As reported in [2], all commands that use redirection can potentially
leave an empty (i.e. broken) target.

[Note 3]

Another (even safer) approach might be to always write to a temporary
file, and rename it to $@ at the end of the recipe.

   <command>  > $(tmp-target)
   mv $(tmp-target) $@

It would require a lot of Makefile changes, and result in ugly code,
so I did not take it.

[Note 4]

A little more thoughts about a pattern rule with multiple targets (or
a grouped target).

    %.x %.y: %.z
            <recipe>

When interrupted, GNU Make deletes both %.x and %.y, while this solution
only deletes $@. Probably, this is not a big deal. The next run of make
will execute the rule again to create $@ along with the other files.

[1]: https://lore.kernel.org/all/YLeot94yAaM4xbMY@gmail.com/
[2]: https://lore.kernel.org/all/20220510221333.2770571-1-robh@kernel.org/
[3]: https://lists.gnu.org/archive/html/help-make/2021-06/msg00001.html
[4]: https://www.cons.org/cracauer/sigint.html



Fixes: 392885ee ("kbuild: let fixdep directly write to .*.cmd files")
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Pull ext4 fixes from Ted Ts'o:
 "Regression and bug fixes:

   - Performance regression fix from 5.18 on a Rasberry Pi

   - Fix extent parsing bug which triggers a BUG_ON when a (corrupted)
     extent tree has has a non-root node when zero entries.

   - Fix a livelock where in the right (wrong) circumstances a large
     number of nfsd threads can try to write to a nearly full file
     system, and retry for hours(!)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: limit the number of retries after discarding preallocations blocks
  ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0
  ext4: use buckets for cr 1 block scan instead of rbtree
  ext4: use locality group preallocation for small closed files
  ext4: make directory inode spreading reflect flexbg size
  ext4: avoid unnecessary spreading of allocations among groups
  ext4: make mballoc try target group first even with mb_optimize_scan

Merge tag 'dax-and-nvdimm-fixes-v6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull NVDIMM and DAX fixes from Dan Williams:
 "A recently discovered one-line fix for devdax that further addresses a
  v5.5 regression, and (a bit embarrassing) a small batch of fixes that
  have been sitting in my fixes tree for weeks.

  The older fixes have soaked in linux-next during that time and address
  an fsdax infinite loop and some other minor fixups.

   - Fix a infinite loop bug in fsdax

   - Fix memory-type detection for devdax (EINJ regression)

   - Small cleanups"

* tag 'dax-and-nvdimm-fixes-v6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  devdax: Fix soft-reservation memory description
  fsdax: Fix infinite loop in dax_iomap_rw()
  nvdimm/namespace: drop nested variable in create_namespace_pmem()
  ndtest: Cleanup all of blk namespace specific code
  pmem: fix a name collision

Pull i2c fixes from Wolfram Sang:
 "I2C driver bugfixes for mlxbf and imx, a few documentation fixes after
  the rework this cycle, and one hardening for the i2c-mux core"

* tag 'i2c-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mux: harden i2c_mux_alloc() against integer overflows
  i2c: mlxbf: Fix frequency calculation
  i2c: mlxbf: prevent stack overflow in mlxbf_i2c_smbus_start_transaction()
  i2c: mlxbf: incorrect base address passed during io write
  Documentation: i2c: fix references to other documents
  MAINTAINERS: remove Nehal Shah from AMD MP2 I2C DRIVER
  i2c: imx: If pm_runtime_get_sync() returned 1 device access is possible

Pick up another "Soft Reservation" fix for v6.0-final on top of some
straggling nvdimm fixes that missed v5.19.

The "hmem" platform-devices that are created to represent the
platform-advertised "Soft Reserved" memory ranges end up inserting a
resource that causes the iomem_resource tree to look like this:

340000000-43fffffff : hmem.0
  340000000-43fffffff : Soft Reserved
    340000000-43fffffff : dax0.0

This is because insert_resource() reparents ranges when they completely
intersect an existing range.

This matters because code that uses region_intersects() to scan for a
given IORES_DESC will only check that top-level 'hmem.0' resource and
not the 'Soft Reserved' descendant.

So, to support EINJ (via einj_error_inject()) to inject errors into
memory hosted by a dax-device, be sure to describe the memory as
IORES_DESC_SOFT_RESERVED. This is a follow-on to:

commit b13a3e5f ("ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP")

...that fixed EINJ support for "Soft Reserved" ranges in the first
instance.

Fixes: 262b45ae ("x86/efi: EFI soft reservation to E820 enumeration")
Reported-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com>
Tested-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Omar Avelar <omar.avelar@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Mark Gross <markgross@kernel.org>
Link: https://lore.kernel.org/r/166397075670.389916.7435722208896316387.stgit@dwillia2-xfh.jf.intel.com


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Merge tag 'kbuild-fixes-v6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix build error for the combination of SYSTEM_TRUSTED_KEYRING=y and
   X509_CERTIFICATE_PARSER=m

 - Fix DEBUG_INFO_SPLIT to generate debug info for GCC 11+ and Clang 12+

 - Revive debug info for assembly files

 - Remove unused code

* tag 'kbuild-fixes-v6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Makefile.debug: re-enable debug info for .S files
  Makefile.debug: set -g unconditional on CONFIG_DEBUG_INFO_SPLIT
  certs: make system keyring depend on built-in x509 parser
  Kconfig: remove unused function 'menu_get_root_menu'
  scripts/clang-tools: remove unused module

Pull s390 fix from Vasily Gorbik:

 - Fix potential hangs in VFIO AP driver

* tag 's390-6.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vfio-ap: bypass unnecessary processing of AP resources

Pull power management fixes from Rafael Wysocki:
 "These fix an uninitialized variable usage in the operating performance
  points code and add missing DT bindings for it.

  Specifics:

   - Fix uninitialized variable usage in dev_pm_opp_config_clks_simple()
     (Christophe JAILLET)

   - Add missing OPP DT properties (Rob Herring)"

* tag 'pm-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  dt-bindings: opp: Add missing (unevaluated|additional)Properties on child nodes
  OPP: Fix an un-initialized variable usage

Pull char/misc driver fixes from Greg KH:
 "Here are three tiny driver fixes for 6.0-rc7.  They include:

   - phy driver reset bugfix

   - fpga memleak bugfix

   - counter irq config bugfix

  The first two have been in linux-next for a while, the last one has
  only been added to my tree in the past few days, but was in linux-next
  under a different commit id. I couldn't pull directly from the counter
  tree due to some gpg key propagation issue, so I took the commit
  directly from email instead"

* tag 'char-misc-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  counter: 104-quad-8: Fix skipped IRQ lines during events configuration
  fpga: m10bmc-sec: Fix possible memory leak of flash_buf
  phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support

Pull tty/serial driver fixes from Greg KH:
 "Here are some small, and late, serial driver fixes for 6.0-rc7 to
  resolve some reported problems.

  Included in here are:

   - tegra icount accounting fixes, including a framework function that
     other drivers will be converted over to using in 6.1-rc1.

   - fsl_lpuart reset bugfix

   - 8250 omap 485 bugfix

   - sifive serial clock bugfix

  The last three patches have not shown up in linux-next due to them
  being added to my tree only 2 days ago, but they are tiny and
  self-contained and the developers say they resolve issues that they
  have with 6.0-rc. The other three have been in linux-next for a while
  with no reported issues"

* tag 'tty-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: sifive: enable clocks for UART when probed
  serial: 8250: omap: Use serial8250_em485_supported
  serial: fsl_lpuart: Reset prior to registration
  serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
  serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
  serial: Create uart_xmit_advance()

Pull cgroup fixes from Tejun Heo:

 - Add Waiman Long as a cpuset maintainer

 - cgroup_get_from_id() could be fed a kernfs ID which doesn't point to
   a cgroup directory but a knob file and then crash. Error out if the
   lookup kernfs_node isn't a directory.

* tag 'cgroup-for-6.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: cgroup_get_from_id() must check the looked-up kn is a directory
  cpuset: Add Waiman Long as a cpuset maintainer

Pull workqueue fix from Tejun Heo:
 "Just one patch to improve flush lockdep coverage"

* tag 'wq-for-6.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: don't skip lockdep work dependency in cancel_work_sync()