Skip to content
  1. Feb 21, 2011
  3. Feb 18, 2011
    • Hema HK's avatar
      usb: musb: OMAP4430: Fix usb device detection if connected during boot · 002eda13
      Hema HK authored 
      OMAP4430 is embedded with UTMI PHY. This PHY does not support the
OTG features like ID pin detection and VBUS detection. This function
is exported to an external companion chip TWL6030. Software must retrieve
the OTG HNP and SRP status from the TWL6030 and configure the bits inside
the control module that drive the related USBOTGHS UTMI interface signals.
It must also read back the UTMI signals needed to configure the TWL6030
OTG module.

Can find more details in the TRM[1].
[1]:http://focus.ti.com/pdfs/wtbu/OMAP4430_ES2.0_Public_TRM_vJ.pdf



In OMAP4430 musb driver VBUS and ID notifications are received from the
transceiver driver. If the cable/device is connected during boot,
notifications from transceiver driver will be missed till musb driver
is loaded.
Patch to configure the transceiver in the platform_enable/disable
functions and enable the vbus in the gadget driver based on the
last_event of the otg_transceiver.

Signed-off-by: default avatarHema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      002eda13
  5. Feb 17, 2011
    • Hema HK's avatar
      usb: musb: Using runtime pm APIs for musb. · 207b0e1f
      Hema HK authored 
      

Calling runtime pm APIs pm_runtime_put_sync() and pm_runtime_get_sync()
for enabling/disabling the clocks, sysconfig settings.

Enable clock, configure no-idle/standby when active and configure force idle/standby
and disable clock when idled. This is taken care by the runtime framework when
driver calls the pm_runtime_get_sync and pm_runtime_put_sync APIs.
Need to configure MUSB into force standby and force idle mode when usb not used

Signed-off-by: default avatarHema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Cousson, Benoit <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      207b0e1f
    • Felipe Balbi's avatar
      usb: musb: gadget: do not poke with gadget's list_head · ad1adb89
      Felipe Balbi authored 
      

struct usb_request's list_head is supposed to be
used only by gadget drivers, but musb is abusing
that. Give struct musb_request its own list_head
and prevent musb from poking into other driver's
business.

Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      ad1adb89
    • Felipe Balbi's avatar
      usb: musb: gadget: beautify usb_gadget_probe_driver()/usb_gadget_unregister_driver · 63eed2b5
      Felipe Balbi authored 
      

Just a few cosmetic fixes to usb_gadget_probe_driver()
and usb_gadget_unregister_driver().

Decreased a few indentation levels with goto statements.

While at that, also add the missing call to musb_stop().
If we don't have OTG, there's no point of leaving
MUSB prepared for operation if a gadget driver fails
to probe. The same is valid for usb_gadget_unregister_driver(),
since we are removing the gadget driver and we don't have
OTG, we can completely unconfigure MUSB.

Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      63eed2b5
    • Felipe Balbi's avatar
      usb: musb: do not error out if Kconfig doesn't match board mode · 75a14b14
      Felipe Balbi authored 
      

During development, even though board is wired
to e.g. OTG, we might want to compile host-only
or peripheral-only configurations.

Let's allow that to happen.

Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      75a14b14
  7. Feb 04, 2011
  9. Feb 01, 2011
    • Mian Yousaf Kaukab's avatar
      usb: musb: introduce api for dma code to check compatibility with usb request · 5f5761cb
      Mian Yousaf Kaukab authored 
      

Gadget MUSB driver handles dma mappings in musb_gadget_queue(). Where as it is
possible for  dma code to reject the usb request later at ->channel_program()
called from txstate()/rxstate()

For example ->channel_program in tusb6010_omap.c:

static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
        u8 rndis_mode, dma_addr_t dma_addr, u32 len)
{
...
	if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz))
		return false;
...
	if (dma_addr & 0x2)
		return false;
...
}

In this case, usb request will be handled in PIO mode which renders dma mapping
operations unnecessary.

This patch adds an api to allow dma code to indicate incompatibility with usb
request. Gadget musb driver call this api, if available, before dma mappings to
avoid any unnecessary mapping operations.

Signed-off-by: default avatarMian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      5f5761cb
    • Mian Yousaf Kaukab's avatar
      usb: musb: maintain three states for buffer mappings instead of two · c65bfa62
      Mian Yousaf Kaukab authored 
      

If dma buffers are mapped by a higher layer, with a boolean musb_request.mapped
it is still possible to call dma_sync_single_for_device() from
musb_g_giveback(), even if txstate()/rxstate() has called unmap_dma_buffer()
before falling back to pio mode.

Moreover, check for musb_ep->dma is moved within map_dma_buffer() so where
applicable checks for it are removed. And where possible, checks for
is_dma_capable() are merged with buffer map state check.

Signed-off-by: default avatarMian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      c65bfa62
    • Felipe Balbi's avatar
      usb: musb: disable double buffering when it's broken · 06624818
      Felipe Balbi authored 
      

We know that blackfin doesn't support double
buffering feature as of today. So we add a
flag set by musb_platform_init() to forcefully
disable that feature.

Such flag is created and marked as deprecated
to force us to find a solution for the missing
double buffering support on blackfin.

Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      06624818
    • Bob Liu's avatar
      usb: musb: hsdma: change back to use musb_read/writew · 9c668079
      Bob Liu authored 
      

Blackfin platform doesn't support 32bits musbdma registers, so change back to
use musb_read/writew instead of musb_read/writel and simply some format casts.

Signed-off-by: default avatarBob Liu <lliubbo@gmail.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      9c668079
    • Sergei Shtylyov's avatar
      usb: musb: core: fix IRQ check · 541079de
      Sergei Shtylyov authored 
      

musb_probe() only regards 0 as a wrong IRQ number, despite platform_get_irq()
that it calls returns -ENXIO in that case. It leads to musb_init_controller()
calling request_irq() with a negative IRQ number, and when it naturally
fails, the following is printed to the console:

request_irq -6 failed!
musb_init_controller failed with status -19

Fix musb_probe() to filter out the error values as well as 0.

Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      541079de
    • Ming Lei's avatar
      usb: musb: fix kernel panic during s2ram(v2) · 456bb169
      Ming Lei authored 
      

This patch fixes kernel panic during s2ram, which is caused
by the below:

	- musb is not put into drv data of musb platform device if
	CONFIG_USB_MUSB_HDRC_HCD is defined

	- glue layer driver always get musb instance via platform_get_drvdata.

The patch fixes the issue by always puting musb into drv data
of musb platform device, which is doable even the platform device
is a host controller device.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: default avatarMing Lei <tom.leiming@gmail.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      456bb169
  11. Jan 10, 2011
  13. Dec 16, 2010
  15. Dec 11, 2010
  17. Dec 10, 2010